It is necessary to pay attention to choosing high-quality engine oil suitable for the cars we use, because this allows us to protect and maintain the engines of vehicles using common rail diesel engines with maximum efficiency. PTT Intelligent has developed DYNAMIC high-pressure common rail SAE 10W-30 and SAE 15W-40 two common rail diesel engine synthetic technical grade oils to meet demand and maintenance requirements. Common rail diesel engines, especially
There are 2 SAE viscosity values. 10W-30 and 15W-40 are dedicated to common rail diesel engines.

For engine oil from PTT lubricants, these two viscosity values ​​have been developed. To adapt to common rail diesel engines, DYNAMIC high pressure common rail SAE 10W-30 is suitable for ordinary diesel vehicles. The 150,000 kilometers of rails with less mileage and the dynamic high-pressure common rail SAE 15W-40 are suitable for vehicles with ordinary diesel engines. Tracks that have been used for a long time have higher mileage. 150,000 kilometers
Attach CLEAN and locking technology
"Clean dirt, lock in cleanliness, and restore the highest performance throughout the process"

The product uses cleaning and locking technology in the engine oil to help wash away dirt and maintain the cleanliness of the engine, thereby restoring the best performance during the entire riding process.
Because the piston in the engine must work at a high temperature to burn, causing dirt. Easily such as ring groove (ring groove) and piston crown (piston crown) using this technology to clean and LOCK will control dirt from the beginning.
1. Clean the stains with high-quality detergent. Higher, helps to restore the freshness of pistons and engines
2. Locking inhibits the occurrence of surface dirt. It is best to clean the surface and reduce the burden. Cleaner and keep the engine fresh

You can have confidence in the test results. This clean and LOCK technology makes the engine cleaner, which is 35.48% higher than the API standard. CI-4 was determined by the "CAT 1R Top-bank Carbon" test.
It also passed the "Abrasion Resistance and Corrosion Resistance Evaluation Mike T-12" test to provide comprehensive protection that is 53.20% higher than the CI-4 standard, keeping the engine running at full load. Performance provides good acceleration throughout the replacement cycle and prolongs service life.
The package, the running information complies with the world-class standards of the United States (API), Europe (ACEA) and Japan (JASO).

In addition, the DYNAMIC high-pressure common rail engine oil from PTT lubricants, whether it is the viscosity value or the world-class standard of 3 institutions:
1. API standard (from the United States) CI-4 / SL
2. ACEA standard (from Europe) A3/B4
3. JASO standard (from Japan) DH-1 / DL-0

Committed to the development of DYNAMIC high-pressure common rail, compatible with diesel engines. All high-performance common rail models, including technical engines from the United States, Europe, and Japan, give you confidence to protect and take good care of the general-purpose engine, so that you can rest assured that no matter how difficult your task is, from north to south, every time you step on the accelerator, You can rest assured to keep the engine running at full load throughout its service life.

You can
Participate in PTT to remind dealer shops
-PTT station participating in the branch
FIT Auto car service center of each branch